ALUMINUM SLIDING GATE
Download File https://tinurll.com/2tkKEi
Between sturdiness and simplicity, the aluminum sliding gate is a good compromise between privacy and clarity. It is the ideal gate for a bright and elegant entrance, perfectly secured. Both classic and modern, it adapts to all styles!
The semi-openwork aluminum sliding gate slides manually to the right or to the left, depending on your needs. This model, particularly adapted to the needs of large dimensions, does not encroach on your garden, nor on the street.
Qualicoat and Qualimarine certified, this semi-openwork aluminum sliding gate is rust and corrosion resistant.Sturdy, it will not deform over time and requires little maintenance throughout the year.
Solid and robust, aluminum is a modern material that requires little maintenance. In order to preserve the original quality of your gate, we nevertheless advise you to clean it at least twice a year, in the fall and in the spring.
I am a DIY pro, it took me 9 hours to assemble. The instructions are very poorly done, no markings on the uprights, I have known Chinese instructions much clearer. You just have to mark the uprights with the same letters as on the diagram. I had to re-drill the spacer caps (I) because the holes did not fall in front of the threads. The screw heads screwed up like nothing, none in addition. No tools provided, you could at least provide a screwdriver bit and a 4mm drill bit.I opted for this gate for its low height that I can't find elsewhere but I regret my purchase. It's too hard to assemble and it doesn't seem very solid to see in use.
Missing a lot of screws (rail etc........) 70 eurosRe-cutting to pass the locks of the gate and wicketObligation to buy 2 rollers for stability (the gate mount this twist at the junction in the middle) 56 euros including postage delivered without screwsThe 2 stars that I put (just for the aesthetics of the gate that I just put)
Hello, we are sorry for this bad experience. First of all, the screws and bolts supplied are only for the assembly of the gate and not for its installation. Concerning the addition of casters, initially, it is not necessary to maintain the gate despite its 4 meters length. Indeed, there are four places for the wheels because of the reversibility of the gate, it is therefore necessary to position the wheels according to the chosen reversal. We invite you to contact us at 06 30 10 98 35 in order to better understand what happened on the whole order. Thank you very much, the Packit team.
Very good product and nice finish.Quite easy to assemble, well the assembly instructions.Small drawbacks, however, the mounting screws are a little fragile, a torx or hexagon would be more appropriate and the sliding gate swallow seems a little light, to see with time
Good quality. The instructions must be read several times to be understood. The resistance of the assembly of the two parts is nevertheless a little weak to my taste. The final result is very satisfactory, nice gate. Allow 3 to 4 hours of assembly for a single person.
Very good product Delivery packaging guaranteeing an intact product, Good quality gate and wicket, Quality machining hence very precise assembly, Manual with a few small gaps that disappear with a good rereading (even 2). For the assembly of the posts, I recommend the use of a ratchet strap, the only mallet being insufficient.
This simple, yet heavy duty system can handle almost all sliding gate applications. Sealed bearings and covered rollers avoid many of the usual maintenance and efficiency problems due to weather elements. They also help comply with UL325 and ASTM F2200 gate safety standards.
All products are manufactured in Italy by Fratelli Comunello, the world leaders in gate hardware. The technical innovation in the system, as compared to a traditional sliding gate, lies in the fact that the entire gate is cantilevered off the ground without any rollers traveling on the ground. This allows for free movement of the gate in uneven ground conditions and reduces the wear and tear on the gate and on any installed gate automation. The sealed bearings on the carriage assembly require no maintenance or lubrication. Besides, it gives the gate a nice clean look with minimal visible hardware. This engineered solution also reduces the length of the counterbalance resulting in a smaller overall gate length.
The bottom track is available in galvanized steel, aluminum track and stainless steel and can accommodate a solution for every type of rolling gate project. By welding or mechanically fastening the gate to the bottom track, DuraGates sliding gate system can be used with any gate material such as steel, wood, vinyl, aluminum, chain link, etc.
The model selection depends on the combination of the size of the opening and the weight of the gate. Based on the combination, several models may fit your project. The heavier the model, the smaller the counterbalance (tail of the gate) which becomes increasingly important when you have a tight space. Our cantilever gate configurator will provide you the optimal selection of model along with dimensions of the tail of the gate, the position of the carriages and the foundation size required.
The hardware, combined with a range of high-quality gate automation we offer, is truly a long lasting and complete solution for any cantilever sliding gate. Send us your sliding gate details for a customized gate configuration.Request a QuoteGALVANIZED STEEL TRACK MODELSCGS - 250.8MOPENING WEIGHT : Up to 900 lbsGATE OPENING : Up to 13 ftThis mini version can still handle a 1000lb gate and is a perfect option for not only residential properties but also for many light-duty commercial sliding gate applications. Also used wherever a sliding barrier or privacy is desired such as decks, trash enclosures, loading docks, ramps, etc. A versatile and economical system.
Read MoreCGS - 250.8POPENING WEIGHT : Up to 1300 lbsGATE OPENING : Up to 19 ftThis model can accommodate light to medium weight gates and is commonly used for a wide variety of commercial and residential installations.
Read MoreCGS - 350.8GOPENING WEIGHT : Up to 4050 lbsGATE OPENING : Up to 59.4 ftThis cantilever gate hardware model is recommended for large and heavy industrial or commercial sliding gates, especially in high traffic applications.
Read MoreINTEGRATOR GALVANIZED STEEL TRACK MODELSCGS - 500.8MOPENING WEIGHT : Up to 1100 lbsGATE OPENING : Up to 23 ftSmall Carriage set with integrated drive system connects directly to the gate operator and hides the mechanics within the track for a safe, protected installation. 8 wheels with noiseless shielded bearings protect against dust and increase service life. This Small model is a preferred solution for many residential properties and light duty commercial applications. Automation Ready!
Read MoreCGS - 500.8POPENING WEIGHT : Up to 1760 lbsGATE OPENING : Up to 26 ftLarge Carriage set with integrated drive system connects directly to the gate operator and hides the mechanics within the track for a safe, protected installation. 8 wheels with noiseless shielded bearings protect against dust and increase service life. The Large model is a good solution for large residential gates, most commercial applications, and light weight industrial applications. Automation Ready!
Read MoreCGS - 500.8GOPENING WEIGHT : Up to 2645 lbsGATE OPENING : Up to 52 ftGrande Carriage set with integrated drive system connects directly to the gate operator and hides the mechanics within the track for a safe, protected installation. 8 wheels with noiseless shielded bearings protect against dust and increase service life. The Grande model is the solution for heavy ornate residential gates, heavy or wide commercial applications, and heavy duty, high cycle industrial gates. Automation Ready!
Read MoreALUMINUM TRACK MODELSCGA - 350.5MOPENING WEIGHT : Up to 550 lbsGATE OPENING : Up to 16 ftOur light duty aluminum hardware is used for residential and commercial sliding gates, especially where the application calls for an aluminum gate.
Read MoreCGA-350.5POPENING WEIGHT : Up to 708 lbsGATE OPENING : Up to 26.4 ftThis rolling gate model is recommended for commercial or residential applications. The heavy duty track extrusion is perfectly weldable for aluminum gates.
Read MorePROJECT GALLERYResidential Gate in New JerseyReference Number : D117This residence in North Jersey is on a busy street and did not have the space for a swing gate. Client needed an ornamental sliding gate that blends in with matching fence .....
Read MoreLuxury car garage in New JerseyReference Number : D114Due to a sloping driveway, the luxury garage could not use an ordinary sliding gate. The gate weighs over 1500 lbs and the opening is about 22ft...
Read MorePrivate Residence in BermudaReference Number : D118The homeowner fabricated this wood gate with the help of a local contractor. The bottom track is item CGA-345P in aluminum. Notice how well the bottom track attaches to ....
Read MoreResidence Salt Lake CityReference Number : D113Our client in Salt Lake City is now enjoying his sliding gate using DuraGates hardware. The working space was tight but that was not an issue for DuraGates hardware.....
The NEVIS Driveway sliding gate, with its simple and classic design is the perfect compromise between openwork and fully boarded sliding gate. This horizontal mixed infill model will allow you to reconcile luminosity and privacy by means of a barred opening in the upper part and a shading in the lower part.Description : Sliding gate with mixed infill, Vertical Board with Straight Top & horizontal Open PalesMaterial : AluminiumColour : Anthracite grey (RAL 7016)Dimensions : Width 365cm x Height 163cmRequired width with clearance : 781cmMinimum height of pillars : 175cmInspired and designed in FranceThis Sliding Gate with mixed infill kit, to be assembled and installed by yourself, contains :- 4 aluminium bars (Width 7.8cm)- 22 powder-coated aluminium slats (Width 15.5cm)- 1 top guide with 4 nylon wheels- 7.9m aluminium guide rail- 4 steel wheels- 1 closes strike box- 1 limit stop- 1 cylinder lock - 1 handle (Colour Black)- 5 keys- Finishing caps- Screws and boltsIf you want an automatic sliding gate, you will find promotional packages consisting of a sliding gate of your choice with the appropriate sliding gate automation.If your installation requires pillars, Casanoov offers promotional packages in the \"Sliding Gate\" categoryThese packages contain one Aluminium sliding gate of your choice, together with two aluminium posts to match the chosen dual sliding gate.The NEVIS model is also available in other sizes.Also available as a pedestrian or double swing gateDriveway Gate delivered in kit formClear instructions, quick and easy assemblyYou will find all the necessary information about this product in the technical dataIt is technically possible to install your gate with an opening from the right to the left.You will find all the information you need to change the opening direction in our installation instructions.Our installation instructions for sliding gates have been designed to offer you two different installation methods depending on the chosen opening direction: from left to right or from right to left.For further information, please contact our customer service via our contact form. 59ce067264
https://www.923theranch.com/forum/untitled-category/ski-region-simulator-free-download